Roobarb Canoe

 Grp mould for carriage Gell, then tissue and 1 ply of csm  2x3 plies of csm later… Smelly dirty job… might try the epoxy paste again. Used the one from axson and alchamie in the past but I see that easy composites do one. We’ll see how this comes out, looks like lots of prerelease but you can see it’s not got too hot which is encouraging so hopefully not too much shrinkage. I’ve used a clear gell so I can see through it, might be helpful if I resin infuse I’ll leave this for a few weeks to mature and cure before using it but will strip it off the pattern work one evening shortly

Weiring made from an old bedroom cupboard…. Wax on, wax off… then some PVA

 So now finishing the carriage  Some high build primer from Scott bader. Not used it before, this is the first coat, I think I’ll sand back and do one more.