Marking out sheer line
Grabbed a little time to mark out the new sheer line for Monkey. Got the BMS from the CAD , 2.1 m from stern, and it’s actually about there… Used the max depth of hull minus about 15mm to allow for the deck (5mm) and track (10mm) Struck a line from the max height at the end of the tracks through the min depth and to the bow, did it also in cad and the bow measurement should be 260mm which surprisingly it is give or take a few mm. Then levelled the boat athwart ships and used a laser level to mark out the cut line, it’s about 150mm to cut off the height of the bow…
